Beta 450 Bedienungsanleitung PDF herunterladen (Seite 15)

Fit two legs and castors (or base plates) to one 4 rung span frame (see

illustration) and two legs and castors to one 4 rung ladder frame. Turn

the height adjustment collar on each leg until approximately 100mm

from the lower end. Insert each leg until the collar is in contact with the

frame’s tubing.

Set each castor brake on by moving the brake lever fully down.

Attach two horizontals

to the upright of each

frame, above the rst

rung and square the two

frames to each other.

Note It may be

advantageous to place

a platform at low level to

assist in “squaring” tower.

With the aid of a spirit

level, you should now

make any necessary

adjustments to level the

tower by turning the

adjustment collar.

Assembly Procedure 1450 Tower - 3T

As before, sit through the trap and rest

against the platform (just below base

of back) with feet rmly placed on

ladder rungs.

Remove horizontal braces and pass

down to operatives below.

Descend to platform level below

and remove top platform.

Standing on platform, unlock

diagonal brace xed at upper

frame then remove diagonal

brace completely.

Remove upper frames.

Repeat steps 1 to 7 until dismantle

process is complete.

Dismantling the Tower

ODD HEIGHT TOWERS - 3T METHOD

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Beta 450 Bedienungsanleitung Seite 15